Minor Paint correction Detail - level 2

1. Wheels cleaned (inside & out) using acid FREE wheel cleaner & Iron out decontaminated

2. Tyre walls deep cleaned removing old tyre dressing oils

3. Vehicle jacked up to gain access  & deep clean to arch area including suspension

4. Pressure rinse bodywork to remove loose dirt

5. Pre wash applied to inner door shuts, fuel flap, boot shut and rinsed down

6. Door & boot shuts agitated with a soft brush and rinsed down

7. Citrus pre wash applied to bodywork and left to dwell

8.  Rinse off citrus pre wash

9. Snow foam applied and left to dwell followed by rinse down 

10. thin covering of snow foam re applied followed by

11. Contact wash exterior with microfiber wash mitt & agitation to badges, window seals and grilles

12. Bodywork rinsed down

13. Lower tar spots removed

14. Iron out decontamination stage to vehicles paintwork & rinsed

15. Paintwork clay barred for final decontamination 

16. Repeat exterior wash with microfiber wash mitt using PH neutral shampoo

17. Final rinse with Purified water for a spot free finish

18. Exterior, wheels, door shuts & grilles dried using the combination of a warm filtered air blow dryer ​

19. Paint depth readings are taken and a printed report is given

20. Multiple stages ( Cut / polish / refine) of machine polishing are performed to remove up to 75% - 80% of defects including wash marring, holograms and swirls enhancing gloss, depth and colour. Wiped down with Gyeon prep to ensure a clean surface for your chosen protection to be applied.​

21. Coating of Gyeon Si02 wax is applied to the paint work for protection (Ceramic coating upgrade available)

22. Exterior plastic trims & tailpipes ceramic coated with Gyeon Trim & Rim

23. Glass cleaned inside and out (Ceramic coating upgrade available)

24. Seat faces, carpet mats & place mats cleaned followed by Gyeon Fabic coat or/and Colourlock Leather shield, dash and trims dusted & wiped down.

25. Gyeon Tire Si02 tyre dressing applied

From £600.00

Time Required 4 days +

Ceramic coating costs

Click here